HPE Community
ProLiant Servers (ML,DL,SL)
1753970 Members
7366 Online
108811 Solutions
New Discussion

SFP adapter 10 Gbits - 568FLR-MMSFP+ / How to connect ?

 
SOLVED
Go to solution
Christo810
Occasional Visitor

‎08-13-2018 02:35 AM

‎08-13-2018 02:35 AM

SFP adapter 10 Gbits - 568FLR-MMSFP+ / How to connect ?

Hi everybody,

I have purchased an 10 Gb Eth SFP+ adapter card for my HPE Proliant DL380 Gen9 server. However, when I opened the boxe, there was indeed a 10 Gb SFP+ adapter, but it is not a PCI or PCIe connector (see the attached pictures).

Could you please help me to identify if this card can be used in a DL380 Gen8 or Gen9 server and if yes, where and how to connect it on the motherboard ?

Thank you !

0 Kudos
Reply
1 REPLY 1
Jimmy Vance
HPE Pro

‎08-13-2018 05:23 AM

‎08-13-2018 05:23 AM

Solution

Re: SFP adapter 10 Gbits - 568FLR-MMSFP+ / How to connect ?

This device appears to be an HPE Ethernet 10Gb 2-port 568FLR-SFP+ Media Module Adapter 866467-B21 .  This device is listed for an HPE ProLiant XL170r /  XL190r Gen10 Server not a ProLiant DL380 Gen9. Plese refer to the ProLiant DL380 Gen9 Quickspec for supported network adapters. Starting at page 37 https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04375627

 

No support by private messages. Please ask the forum! 
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.