ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SLES 12SP3 & PSP & ML350 Gen10

vd3
Occasional Visitor

SLES 12SP3 & PSP & ML350 Gen10

Hi,

hp-health on ML350 Gen10 doesn't work for me on a fresh new SLES12 SP3 installation:

Jul 12 09:09:13 linux hpasmlited[2047]: check_ilo2: BMC Returned Error: ccode 0x0, Req. Len: 15, Resp. Len: 21
Jul 12 09:09:13 linux hpasmlited[2047]: The Integrated Lights-Out Management Processor is not responding!
Jul 12 09:09:13 linux hpasmlited[2047]: Sleeping 30 seconds and will retry . ..
Jul 12 09:09:43 linux hpasmlited[2047]: check_ilo2: BMC Returned Error: ccode 0x0, Req. Len: 15, Resp. Len: 21
Jul 12 09:09:43 linux hpasmlited[2047]: The Integrated Lights-Out Management Processor is not responding!
Jul 12 09:09:43 linux hpasmlited[2047]: Sleeping 30 seconds and will retry . ..
Jul 12 09:10:12 linux systemd[1]: hp-health.service: Start operation timed out. Terminating.
Jul 12 09:10:12 linux systemd[1]: Failed to start HP System Health Monitor.
Jul 12 09:10:12 linux systemd[1]: hp-health.service: Unit entered failed state.
Jul 12 09:10:12 linux systemd[1]: hp-health.service: Failed with result 'timeout'.

And hpssacli doesnt see my P408i and I cannt check disks health.

 

These packages are installed>

hp-smh-templates-10.7.0-1485.2.noarch
hp-snmp-agents-10.80-2965.22.sles12.x86_64
hp-i40evf-kmp-default-3.5.6.1_k4.4.73_5-5.sles12sp3.x86_64
hp-firmware-smartarray-c85df48e20-0.50-3.x86_64
hp-firmware-smartarray-112204add8-4.10-2.1.x86_64
hp-health-10.80-1855.22.sles12.x86_64
hp-ocsbbd-1.1.83.0-1.x86_64
hp-firmware-smartarray-14ef73e580-6.64-2.x86_64
hpssacli-2.40-13.0.x86_64
hpssaducli-2.40-13.0.x86_64
hponcfg-5.3.0-0.x86_64
hpsa-kmp-default-3.4.20-125.sles12sp3.x86_64
hp-firmware-smartarray-ea3138d8e8-5.04-1.1.x86_64
hpssa-2.40-13.0.x86_64
hp-i40e-kmp-default-2.4.6.1_k4.4.73_5-4.sles12sp3.x86_64
hp-firmware-smartarray-46a4d957a7-8.32-1.1.x86_64
hpdsa-kmp-default-1.2.10-135.sles12sp3.x86_64
hpdiags-10.60.2199-2188.x86_64

 

2 REPLIES
vd3
Occasional Visitor

Re: SLES 12SP3 & PSP & ML350 Gen10

Hmm, hp-health no more supported, I have to use iLo :(

Jimmy Vance
HPE Pro

Re: SLES 12SP3 & PSP & ML350 Gen10


@vd3 wrote:

Hmm, hp-health no more supported, I have to use iLo :(


Correct, load amsd. iLO5 now reports all heath information

HPE Agentless Management
https://www.hpe.com/us/en/product-catalog/detail/pip.5219980.html




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!