ProLiant Servers (ML,DL,SL)
1748255 Members
4001 Online
108760 Solutions
New Discussion юеВ

Re: SNMP TRAP: 6026 in CPQHLTH.MIB

 
wsmith05
Occasional Advisor

SNMP TRAP: 6026 in CPQHLTH.MIB

I am getting this trap on a DL360 G5 after a normal reboot. The server had a thermal condition about 4 months ago. Why do we get this delayed trap message after a normal restart from a previous event? This server is at PSP 7.90 (our current internal supported level).
4 REPLIES 4
cnb
Honored Contributor

Re: SNMP TRAP: 6026 in CPQHLTH.MIB

"I am getting this trap on a DL360 G5..."

Wrong forum, s/b Proliant servers.

Did you go into the IML and/or SIM and clear the events?

HTH,
wsmith05
Occasional Advisor

Re: SNMP TRAP: 6026 in CPQHLTH.MIB

Yes the previous events had been cleared. A counterpart of mine thinks it could be a firmware issue with the battery pack. If the problem goes away then I won't worry about it too much. Just wondering if this is a known issue and if there is a definite fix for it.
Alfred Chua
New Member

Re: SNMP TRAP: 6026 in CPQHLTH.MIB

Any solution for this? win 2k3 server reboot normally, but system come out with this error, this is false alarm.
Alfred Chua
New Member

Re: SNMP TRAP: 6026 in CPQHLTH.MIB

you can refer to attachment for screenshot.