ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP and temperature data in Windows 2012 R2

loginName0000
Occasional Visitor

SNMP and temperature data in Windows 2012 R2

Prior to upgrading our Proliant Gen8 server to Windows 2012 R2, I was able to get the temperatures of the system via SNMP by querying the IP address of the server (10.0.0.2).  After the install for Windows 2012 I get an error message "noSuchName at ObjectName(1.3.6.1.4.1.232.6.2.6.8.1.4.0.1)"

So I reinstalled HPE Insight Management Agent, HP Agentless Management Service and HPE WBEM Insight but still can't query temperature via SNMP.  However, if I go query the iLO IP (192.168.0.222) I can get successfully query MIB 1.3.6.1.4.1.232.6.2.6.8.1.4.0.1.

Question: what component or setup I missing on Windows Server 2012 so I can query via SNMP the temperature readings from iLO interface using the server ip address (10.0.0.2)? I recall I had to fiddle with some setting when I first got this working prior to upgrading but I can't figure it out.

1 REPLY
loginName0000
Occasional Visitor

Re: SNMP and temperature data in Windows 2012 R2

I figured out the issue.  Instead of querying "1.3.6.1.4.1.232.6.2.6.8.1.4.0.1" on localhost, I should be querying "1.3.6.1.4.1.232.6.2.6.8.1.4.1.1" I'm not sure why MIB are different after upgrading operating system but now I can query the HOST instead of ILO port like I had before.

I found the correct mib by using Mibble.