ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SP21870, ML350 G3 and NC3131

Chris Shaw
Occasional Visitor

SP21870, ML350 G3 and NC3131

I have created un unattended installation of Windows 2000 and I am trying to add the latest driver pack so that the integrated NIC in the ML350 G3 with be added during the istallation. The problem I have is that the NC3131 that I also have in the system is detected during installation but there some problem loading the drivers (flagged in Device Manager). If I run the same installation without the drivers from SP21870, the NC3131 loads correctly but the integrated NIC is detected by Windows as an Unknown Device. Any thoughts?

Thanks in advance.
1 REPLY
Chris Shaw
Occasional Visitor

Re: SP21870, ML350 G3 and NC3131

For clarification, Device Manager has the following for the NC3131:

This device is not working properly because Windows cannot load the drivers required for this device (Code 31)