HPE Community
ProLiant Servers (ML,DL,SL)
1753716 Members
4349 Online
108799 Solutions
New Discussion

Re: SPI Board REV??

 
bnovy
Occasional Visitor

‎05-30-2014 10:10 AM

‎05-30-2014 10:10 AM

SPI Board REV??

Does anyone know if there is a way to tell the SPI board REV without pulling the board out or does it diplay someplace? We run Linux on the systems and we suspect we have mulitiple systems with REV 0A boards in them but the systems are installed at a DataCenter and do not have ability to Physically touch every system..

 

Thanks

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎06-03-2014 01:12 AM

‎06-03-2014 01:12 AM

Re: SPI Board REV??

What is the server model?

 

Why you need this?

 

google this:

 

"HP ProLiant DL980 G7 Server - How to Identify SPI Board Model "


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
bnovy
Occasional Visitor

‎06-11-2014 11:27 AM

‎06-11-2014 11:27 AM

Re: SPI Board REV??

This is for the DL 585 Server.

 

We are having issues that are causing Gapping on our 10GB NICS as well as we are also seeing some CPU Stalls. From different critical messages we have seen it appears this might have to do with the REV A SPI board, as we where told that HP was replaicing all SPI REV A boards with SPI REV B boards.

 

Thanks for your assistance.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.