ProLiant Servers (ML,DL,SL)
1748259 Members
3769 Online
108760 Solutions
New Discussion юеВ

Re: SPP 2017.07.01 firmware issue

 
SOLVED
Go to solution
PiterParker
Valued Contributor

SPP 2017.07.01 firmware issue

Hi All, 

 

I am was trying to upgrade few of the DL360 G9 servers in offline mode but when I am booting from USB stick I am getting kernel panic error. 

Did anyone experience the same maybe?

Do you know any solution?

Regards, 

Piotr

Regards, 

Piotr

4 REPLIES 4
parnassus
Honored Contributor

Re: SPP 2017.07.01 firmware issue

To create the bootable USB Key with the SPP 2017.07.01 ISO image you had in order to then run it Off-Line on your HPE ProLiant Gen9 Servers, was the latest HPE USB Key Utility used (3.0.0.0 of July, 12nd 2017) or not?


I'm not an HPE Employee
Kudos and Accepted Solution banner
PiterParker
Valued Contributor

Re: SPP 2017.07.01 firmware issue

Hi,

I have extracted HPE USB Key Utility from the ISO image and it is 3.0 version.

 

Any other suggestions?

 

parnassus
Honored Contributor
Solution

Re: SPP 2017.07.01 firmware issue

If HPE USB Key Utility 3.0.0.0 was used to create the Bootable USB Key from the SPP 2017.07.01 ISO file, then:

  1. downloaded SPP 2017.07.01 ISO file's hash (md5/sha256 or whatever required by HPE) was calculated and checked against the one HPE published (to be sure that that particular downloaded ISO file was not damaged/corrupted)?
  2. various different (Size >4GB, <32GB) USB Keys were tested to exclude USB Key hardware issue?

I'm not an HPE Employee
Kudos and Accepted Solution banner
PiterParker
Valued Contributor

Re: SPP 2017.07.01 firmware issue

Hi, 

Thanks for your advise. 

I have compared MD5 checksum of the file online and the one I downloaded previously and they did not match.

Regards, 

Piotr