Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SPP Feb 2013 release, HPSUM Fatal Error

Highlighted
BradV
Valued Contributor

SPP Feb 2013 release, HPSUM Fatal Error

I've been using the Feb 2013 release of SPP on many DL380 G7s, BL460c G6 & G7 with no problem.  However, on two DL380 G5s, it fails immediately with:

 

Fatal Error: Repository Manager has exited unexpectedly.  HP SUM will not quit.

 

Has anyone else seen this.  If so, any resolution?

 

Thanks!

5 REPLIES
ManuelHerdez
Occasional Visitor

Re: SPP Feb 2013 release, HPSUM Fatal Error

Configure almost 1 nic with ip and mask, then try again. this solved the problem.

sorry my english

BradV
Valued Contributor

Re: SPP Feb 2013 release, HPSUM Fatal Error

No, I do have a NIC configured.  That is how I transferred the SPP to the server.  :)

 

I'm not sure what it is.  I opened a case with HP, but that never got anywhere.  I guess I'll just have to wait for the next release and see if they've solved the problem.  I'd like at least a better error message, some logging or something.  :(

Torsten.
Acclaimed Contributor

Re: SPP Feb 2013 release, HPSUM Fatal Error

SPP 2013.09 and HPSUM 6.0 is available.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
BradV
Valued Contributor

Re: SPP Feb 2013 release, HPSUM Fatal Error

I'll download it and give it a try.  It's hard to tell when a new version is out since they don't put a release date on it.  :(

 

Thanks!

Torsten.
Acclaimed Contributor

Re: SPP Feb 2013 release, HPSUM Fatal Error

You can always see the current version here

http://h18004.www1.hp.com/products/servers/service_packs/en/index.html


and the date is part of the name ;-))

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!