STOP D1-Error on ML350 G5

[Gerald Werner]

Hello,
we have several ML350 G5 with Windows 2003 R2 SP2 running at different sites. All of them are running MS SQL Server 2005.
Now we noticed that some of them have sometimes Stop-Errors 0x000000D1 with Bluescreen and ASR. In other cases we have Problems described in the MS article KB942861.
Can anyone acknowledge that these problems correspond?
Any reply is welcome
regards
Gerald Werner

[Mi6t0]

Well, it depends on the HP Agents installed, normally they're being fixed with installation of the latest Proliant Support Pack.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-22527e670418447bb79060e720

Regards,

[Gerald Werner]

We do have PSP 7.91 installed on that Servers, and I think that´s not source of that problem.
Does anybody have these Stop-Errors too?

regards
Gerald Werner

[Mi6t0]

A lot of people have the same problem, D1 is definitely driver problem. Do you perhaps have a minidump or something like that?

[sanesh vig]

Hi Gerald,


Please update the following BIOS version

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&taskId=135&swItem=MTX-a13ea2d1cd0e40c4aed298d6e8&mode=3

And then update PSP 7.91.

Regards

[KarloChacon]

hi


check this
Blue Screen and Stop 0x000000D1 on ProLiant Server Configured with Smart Array E200/P400/P600 Controller Under High Utilization Running STORPORT.SYS and HPCISSS2.SYS Version 5.8.0.xx and Any Edition of Microsoft Windows Server 2003


http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00715130〈=en&cc=us&taskId=101&prodSeriesId=1121586&prodTypeId=15351

regards

[Gerald Werner]

Hello,

the Bios 2007.10.07 and SPS 7.91 are already insalled, and so the agents are current.
The MS KB Article 912944 doesn´t fit, because there´s Win 2003 R2 SP2 installed and .

Unfortunately I haven´t a dumpfile available yet. I´m trying to get one asap.

[Blazhev_1 · Accepted solution]

Hi,

you can install

http://support.microsoft.com/kb/941276

There are a lot of MS & HP advisories reporting the issue. The MS Storport drivers work with the HP SA miniport drivers.

If you get a dump there will be Probably caused by: CISSS2 or storport.sys, both leading to the same...

I think this will help you to solve the problem but it is your decision.

Pac

[Gerald Werner]

I have applied the Storeport Hotfix, and now all affected servers are runnig again.

Best Thanks
Gerald Werner