HPE Community
ProLiant Servers (ML,DL,SL)
1753658 Members
5542 Online
108798 Solutions
New Discussion юеВ

Sas hard drive detection problem

 
gopal3007
Occasional Contributor

тАО07-15-2020 03:39 AM

тАО07-15-2020 03:39 AM

Sas hard drive detection problem

Sir,

I am using hp proliant ml150 gen9 server with two sas 2tb drive with Raid Configured but one drive not showing Indication outside front panal where drive showing blinking lights, How to check it

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО07-15-2020 04:46 AM

тАО07-15-2020 04:46 AM

Re: Sas hard drive detection problem

Consider to check from ILO->storage and from the OS using SSA.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
DANDKS
HPE Pro

тАО07-15-2020 09:11 AM

тАО07-15-2020 09:11 AM

Re: Sas hard drive detection problem

Was it from the beginning or the lights stopped recently?

As mentioned in the other post, verify the Drive's status from iLO Storage tab & also from the Smart Storage Administrator.

Thank you


I am an HPE employee
Accept or Kudo
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.