ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Screws in the bottom hot plug of HP DL380 G9 ?

 
Jimmy Vance
HPE Pro

Re: Screws in the bottom hot plug of HP DL380 G9 ?

This is what a properly installed 2 drive bay should look like

 

2driveumb.jpg

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
Jimmy Vance
HPE Pro

Re: Screws in the bottom hot plug of HP DL380 G9 ?


@rusty0091 wrote:

It look slike you are right, it seems a bit of a design flaw with the UMB, the screws are present on all of the servers and I have tightened them all the way. I have been able to slide a HDD into the slot but it requires a certain nack. I believe the HDD's aren't showing at startup as they are not compatible with the RAID controller included with the UMB, would you happen to know what hard drives are compatible with this RAID controller (HP Dynamic Smart Array B140i Controller)?


The B140i controller on supports SATA drives

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
Highlighted

Re: Screws in the bottom hot plug of HP DL380 G9 ?

http://h20195.www2.hp.com/V2/getpdf.aspx/4AA5-4526ENW.pdf

page 2

 

"The B140i supports only 6 Gb/s SATA drives using the embedded SATA ports that are part of each ProLiant Gen9 server"

 

For example:

https://www.globalonetechnology.com/655710-b21.htm