HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Scsi Cable recommendation for ML350 G4

 
Coldfirex
Occasional Contributor

Scsi Cable recommendation for ML350 G4

Hello,

Ever since HP stopped including a scsi cable with the HP ML350 G3's we have had some random scsi problems with the G4s. We normally add Exabyte VXA tape drives to these servers connected via the onboard scsi adapter. Does anyone else use this type of combination that could help me out on which specific cable I need to be using? I have tried standard 68pin male to male cables with and without passive/active terminators. Sometimes, depending on the configuration, it takes the server hours to get past the bootup stage of checking all the scsi IDs.
Any help would be appreciated.

Thanks,
Alan
1 REPLY
Oleg Koroz
Honored Contributor

Re: Scsi Cable recommendation for ML350 G4

Take a look

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00218264/c00218264.pdf

There is no big difference between ML350 G4 and ML370 G4