HPE Community
ProLiant Servers (ML,DL,SL)
1752808 Members
5758 Online
108789 Solutions
New Discussion

Re: Scsi Controller failure

 
Anup_5
New Member

‎02-03-2004 03:28 PM

‎02-03-2004 03:28 PM

Scsi Controller failure

I have recently installed a 64bit/64mhz dual channel controller, "Ultra3 ALT OS SCSI HBA". This card is not intalling correctly or I have misconfigured it. The errors while the system scans for Scsi devices is :
1. 39160 - Scsi Controller failure to whichever Channel I plug in the Tape Library - Compaq TL891 minilibrary.

1 .the Scsi Bios not installed (this i can understand since the boot controller is embedded.) any way to remove the error message?
Thanks,
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎02-04-2004 12:29 AM

‎02-04-2004 12:29 AM

Re: Scsi Controller failure

1. Check that the library has termination at the end of the chain. Most likely you do not have the terminator seated well enough.

2. You will not get SCSI bios installed with a library. This message is stating it did not find a hard disk. Just ignore this message.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.