ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Second CPU Utilization is 0% on Netware 5.1

タコ
Occasional Visitor

Second CPU Utilization is 0% on Netware 5.1

I use ProLiant 1600 with Netware 5.1
When I made sure CPU Utilization on CIM 5.50,
It was 0%.

ML530G1 with Netware 5.1 has No Problem.
What can I do?

regards
1 REPLY
Janine Bertolo
Honored Contributor

Re: Second CPU Utilization is 0% on Netware 5.1

According to Novell:

"On some servers, monitor will show processor utilization at 0% all of the time. This problem is not specific to SMP but seems to be more likely to occur on SMP server. All indications are that it is purely a cosmetic problem. A fix to the problem has not yet been implemented."

Novell says it's cosmetic. See the TID located at http://support.novell.com/cgi-bin/search/searchtid.cgi?/10052541.htm

Cheers,

Janine
To get results you've never had before, try something you've never tried before.