HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Second NC7771 NIC not recognised in Systems Management Homepage

 
André Schneickert
Occasional Advisor

Second NC7771 NIC not recognised in Systems Management Homepage

Hello,

we have a problem with the System Management Homepage (v2.1.5.146) on a Proliant ML370 G4 server with Windows Server 2003 R2.

In addition to the on-board NIC, we have added two additional NC7771 Gigabit NICs to the server, located in PCI-X slots 1 and 2.

In the System Management Homepage, only the NIC in slot 2 is visible, the other NIC in slot 1 isn't listed.

If you click on System -> Expansion Slots, both NICs are listed, though.

Both NC7771 NICs work normally in the OS.

The Insight Management Agents version is 7.51.

What could be wrong here?

Thanks in advance!

André Schneickert
6 REPLIES
Daniel Leblanc
Honored Contributor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

1#System Management Homepage upgrade tp 2.1.6.156

2#HP NC10xx/67xx/77xx/150x/320x/324x/325x/326x Gigabit Ethernet NIC Driver for Windows Server 2003 upgrade to 9.52(CP006641)

3#HP Network Configuration Utility for Windows Server 2003 upgrade to 8.40 (CP006331)

4#HP Insight Management Agents for Windows 2000/Windows Server 2003 upgrade to 7.60(CP006281)

5#REBOOT
André Schneickert
Occasional Advisor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

Hello,

updating the drivers and the System Management Homepage didn't help.
Same problem as before.

Andre
Daniel Leblanc
Honored Contributor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

Did you try also an other NC7771 in that slot or inter change the nic between slot 1 to 2 and 2 to 1 to see if can see it !

Do you have an other server like this that you can transfert hard drive to see if it software or hardware?
André Schneickert
Occasional Advisor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

Hello Daniel,

I found the solution myself. Haven't thought of it in the first place...
We are not running TCP/IP on that second card, but some other proprietary protocol.
No TCP/IP -> no SNMP -> no management.

Andre
Daniel Leblanc
Honored Contributor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

Ok Well have a nice day!
André Schneickert
Occasional Advisor

Re: Second NC7771 NIC not recognised in Systems Management Homepage

Problem fixed. Thread closed.