Second logical drive on Smart Array 6402

[Michael Connors]

I have an HP ProLiant ML 570 G3 server with a Smart Array 6402 card installed. On Channel 1, I have four 146.2 GB drives configured in a RAID 5 configuartion as Logical Drive 2. On Channel 2, I have two 72.2 GB drives configured in a RAID 1 configuration as Logical Drive 1. Microsoft Windows Server 2003 x64 Standard is installed on the Logical Drive 1 as the C drive. How do I configure/format Logical Drive 2 so Windows 2003 Server can see it?

[Girma Kassa_2]

Hi Michael,

The Logical 2 should show under your disk management as Disk 0, and follow the below link from Microsoft which shows you how to configure you disk. Artcle Id 323442...

http://support.microsoft.com/?kbid=323442

Cheers

Girma

[Girma Kassa_2 · Accepted solution]

Hi Michael,

The Logical 2 should show under your disk management as Disk 1, and follow the below link from Microsoft which shows you how to configure you disk. Artcle Id 323442...

http://support.microsoft.com/?kbid=323442

Cheers

Girma