1748204 Members
3207 Online
108759 Solutions
New Discussion юеВ

Re: Second processor

 
Dirk L├╢ffler
Occasional Contributor

Second processor

I try to use a ML350 G1 Board outside a Compaq chassis. Feature Board is installed an it runs with one PIII 1000 and the adapter in the second processor slot. When I insert a second PIII 1000 the board doesn't start (the processor is ok, the board starts when it is in the first slot). Must be something more be configured to use a sec. processor?

Dirk
4 REPLIES 4
Prashant (I am Back)
Honored Contributor

Re: Second processor

Hi,

First upate the BIOS then check again
Second Clear NRAM then check.
Third, Is there any error in IML
Second, Are processors of same speed and all

Prashant S.
Nothing is impossible
Dirk L├╢ffler
Occasional Contributor

Re: Second processor

Thank you,

do have a link to the actual BIOS?
How can I clear NRAM?
What is IML?
Processors are ablolut identical.

You see, its my first Compaq....

Dirk
Terry Hutchings
Honored Contributor

Re: Second processor

Did you install a second ppm for the second processor? This might cause this issue.
The truth is out there, but I forgot the URL..
Dirk L├╢ffler
Occasional Contributor

Re: Second processor

Thank you,

second PPM is installed (but perhaps not working? I try to exchange between the 2 PPM's to see if the problem follows the PPM's)

Dirk