HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Securepath for AIX 5.1 HSV issue

 
ecorban
Frequent Advisor

Securepath for AIX 5.1 HSV issue


I have configured the SP on AIX 5.1 using an HSV array.
I have the zoning setup correctly but am having problems with the failover/failback. It just doesnot happen. when i issue
the cbxfcsm listall it shows
that the active and standby are the same, ie scsi2. I can i change it to force the standby path to be the other path. REally in a jam here,


# Device Online Alternate
hdisk1 scsi2 0,0
hdisk9 scsi2 2,1 scsi2 0,1
hdisk10 scsi2 2,2 scsi2 0,2
hdisk11 scsi2 2,3 scsi2 0,3
hdisk12 scsi2 2,4 scsi2 0,4
hdisk2 scsi2 2,0
hdisk3 scsi3 1,0
hdisk4 scsi3 3,0