ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

Serial Output Log of Smart Array controller

Occasional Visitor

Serial Output Log of Smart Array controller

[ Edited ]

Hi.

I have recently found some messages in a serial output log of Smart Array P212 controller in ProLiant DL380G7 which seem to be error messages. Look like:

 

[10/14 17:47:22]PR 9fc786b0h:D004 Op=1a PLErr=02 IopErr=04 S=02 KCQ=6:29:02

[10/14 17:51:12]PR 9fc78a48h:D004 Op=34 PLErr=02 IopErr=04 S=02 KCQ=2:3a:00

[10/14 18:16:30]PR 9fc786b0h:D004 Op=00 PLErr=02 IopErr=04 S=02 KCQ=6:28:00

[10/14 18:18:51]PR 9fc78a48h:D004 Op=08 PLErr=02 IopErr=04 S=02 KCQ=0:00:01

[10/14 18:18:51]PR 9fc78a48h:D004 Op=08 PLErr=02 IopErr=04 S=02 KCQ=8:00:05

[10/14 18:30:41]PR 9fc786b0h:D004 Op=00 PLErr=02 IopErr=04 S=02 KCQ=6:28:00

[10/14 18:31:18]PR 9fc786b0h:D004 Op=08 PLErr=02 IopErr=04 S=02 KCQ=0:00:01

[10/14 18:31:18]PR 9fc78de0h:D004 Op=08 PLErr=02 IopErr=04 S=02 KCQ=8:00:05

[10/15 12:12:38]PR 9fc786b0h:D004 Op=00 PLErr=02 IopErr=04 S=02 KCQ=6:28:00

[10/15 12:26:19]PR 9fc786b0h:D004 Op=00 PLErr=02 IopErr=04 S=02 KCQ=6:28:00

[10/15 12:26:43]PR 9fc786b0h:D004 Op=08 PLErr=02 IopErr=04 S=02 KCQ=8:00:05

 

Messages occur irregularly and do not coincide with any regular tasks or other events. The controller is used for connecting to external SAS tape autoloader.

 

I have searched google.com and hp.com sites for any reasonable patterns but found no useful information about messages in a serial output log of SA. There are only documents that instruct on how to get the contents of serial output log of Smart Array controllers, but no documents that help to interpret this log.

 

Do anybody know, what does these messages mean and is there any (official) documentation, which can help me to interpret/decode these messages?

 

Andreiy

 

P.S. This thread has been moved from Storage>General to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

 

2 REPLIES
HPE Pro

Re: Serial Output Log of Smart Array controller

Hi,

 

This could be because of the following reasons:

Controller Firmware.

Storage device firmware.

Drive firmware.

 

Run Array Diagnostics on the controller or any similar diagnositcs for that SAS Tape Autoloader.

 

Thank You!
I am a HP employee.

Useful Links for ProLiant Servers

Highlighted
Frequent Advisor

Re: Serial Output Log of Smart Array controller

[ Edited ]

Hello,

 

I found this info on some of the scsi errors, maybe it helps.

 

KCQ=6:29:02

Unit Attention - SCSI bus reset occurred

 

KCQ=2:3a:00

Not Ready - medium not present

 

KCQ=6:28:00

Unit Attention - not-ready to ready transition (format complete)

 

I found this info here: http://en.wikipedia.org/wiki/Key_Code_Qualifier

 

Regards

//Add this to "OnDomLoad" event