HPE Community
ProLiant Servers (ML,DL,SL)
1753905 Members
9821 Online
108810 Solutions
New Discussion

Re: Server RAID Configuration problem

 
SOLVED
Go to solution
gopal3007
Occasional Contributor

‎10-19-2020 04:06 AM

‎10-19-2020 04:06 AM

Server RAID Configuration problem

( 292 - Invalid hpe software raid configuration . hpe b140i sw raid mode is NOT supported when the mode is configured for legacy bios mode . Action : Configuration the boot mode to UEFI mode if using hpe sw raid. )

Sir,

I am working with hp proliant ML150 Gen9 server and Raid configuration faild due to power failaure .

But server is running with operating system with hospital software so how i can check this problem .

Please Help

0 Kudos
Reply
1 REPLY 1
mysy
Valued Contributor

‎10-19-2020 08:54 AM - edited ‎10-19-2020 08:57 AM

‎10-19-2020 08:54 AM - edited ‎10-19-2020 08:57 AM

Solution

Re: Server RAID Configuration problem

From message ,that server current use legacy bios mode boot up.   hpe b140i sw raid mode is NOT supported in this mode.

It request server reboot with UEFI mode bootloader,  what OS your server running now ?  It may just some wrong boot sequence after power failed, reboot and press F11 with boot up menu to check what UEFI loader your have.

 

You also will need instal HPE SSA software to config or read error message from Raid card in online mode.

You could use SSA windows version or Esxi SSA cli mode version.

Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.