ProLiant Servers (ML,DL,SL)
1753685 Members
5348 Online
108799 Solutions
New Discussion

Server Shut down and restart

 
Ayman Altounji
Valued Contributor

Server Shut down and restart

My Server stops with the following Error Message in the Event Viewer:
Event ID: 4188
Source: Sys Mgmt
Category: None

The Compaq System Management Driver has detected that the system encountered an NT bugcheck prior to this boot. The bugcheck data was: STOP: 0x0000000A (0x00310063, 0x0000001C, 0x00000000, 0x80116090)

What`s the fault??

Thank`s Franco
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Server Shut down and restart

Hi we have the same problem with one Proliant 5500 R.

We checked out Microsofts KB for it (just look for Q165863 ).
I found out that the bugchecks are based in SCSIPORT.sys or ntoskrnl.exe.
Maybe this will help you a bit.
But on the other Hand check out :
ProLiant 5500 Hardware
Subject Unexpected reboot
Author jlauzon99 on December 28,2000 9:28am
Could also be a hardware issue.