HPE Community
ProLiant Servers (ML,DL,SL)
1753507 Members
5371 Online
108795 Solutions
New Discussion

Server doesn't come up

 
Ayman Altounji
Valued Contributor

‎04-12-2002 04:00 PM

‎04-12-2002 04:00 PM

Server doesn't come up

This server has working ok...
but after a ppower failureon the building.
The server doesn't come up again. the LCD doesn't show anything exexcepthe firmware version, and we try to see any alert leledut not.

We try to reinre install processors, memory, cards. But we don't have any signal on the video card, or keyboard..

We cleared NVRAM NV RAMothing too,,,
0 Kudos
Reply
1 REPLY 1
Mark Cloutier
Respected Contributor

‎05-27-2002 04:00 PM

‎05-27-2002 04:00 PM

Re: Server doesn't come up

The peripheral board might have been damaged during the power failure. On the main system board you should have interloc lights. This should help us determine where the fault is. There is an ilustration on the back of the panel for the 6000.
Please look for these LED's.
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.