HPE Community
ProLiant Servers (ML,DL,SL)
1753505 Members
5306 Online
108794 Solutions
New Discussion юеВ

Re: Server not boot after a single HDD failed.

 
Sanaullah
Advisor

тАО05-17-2011 02:26 AM

тАО05-17-2011 02:26 AM

Server not boot after a single HDD failed.

Hi All,
RAID1 configured in DL380 G4. 1x HDD found failed in RAID1 and second HDD is working fine, but OS not boot.
Kindly advice.
0 Kudos
Reply
3 REPLIES 3
Johan Guldmyr
Honored Contributor

тАО05-17-2011 02:53 AM

тАО05-17-2011 02:53 AM

Re: Server not boot after a single HDD failed.

Hi,
Which messages do you get in POST and which did you chose?

Is this the SAS or SCSI DL380 G4?
0 Kudos
Reply
Sanaullah
Advisor

тАО05-17-2011 11:48 AM

тАО05-17-2011 11:48 AM

Re: Server not boot after a single HDD failed.

It's SCSI dl380 G4. And nothing POST received during boot. but OS not boot. Window OS installed.
Hard drive are connected with SA 6i RAID Controller.
In boot controller Order it priority is 1st, also Standard boot order Harddrive priority is also first. But O/S not boot.
Also check the status of Both hard drive in ACU, Logical drive (RAID 1) and its Both HDD are in OK state. But OS not Boot.
Kindy advice.
0 Kudos
Reply
Johan Guldmyr
Honored Contributor

тАО05-17-2011 09:05 PM

тАО05-17-2011 09:05 PM

Re: Server not boot after a single HDD failed.

Did you replace the drive?
What does it say in your ILO log?

I think an ADU report would be nice to see, can you attach one to this post?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.