ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Server not boot after a single HDD failed.

Sanaullah
Advisor

Server not boot after a single HDD failed.

Hi All,
RAID1 configured in DL380 G4. 1x HDD found failed in RAID1 and second HDD is working fine, but OS not boot.
Kindly advice.
3 REPLIES
Johan Guldmyr
Honored Contributor

Re: Server not boot after a single HDD failed.

Hi,
Which messages do you get in POST and which did you chose?

Is this the SAS or SCSI DL380 G4?
Sanaullah
Advisor

Re: Server not boot after a single HDD failed.

It's SCSI dl380 G4. And nothing POST received during boot. but OS not boot. Window OS installed.
Hard drive are connected with SA 6i RAID Controller.
In boot controller Order it priority is 1st, also Standard boot order Harddrive priority is also first. But O/S not boot.
Also check the status of Both hard drive in ACU, Logical drive (RAID 1) and its Both HDD are in OK state. But OS not Boot.
Kindy advice.
Johan Guldmyr
Honored Contributor

Re: Server not boot after a single HDD failed.

Did you replace the drive?
What does it say in your ILO log?

I think an ADU report would be nice to see, can you attach one to this post?