ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Server rebooted

 
SOLVED
Go to solution
3zzz
Occasional Contributor

Server rebooted

My HPE Proliant DL 380 Gen9  rebooted this week, with no reason. It is connected to a UPS. In the log files of the UPS there is nothing to see. In the logs of my server, there was just the power kernel error.

Now the warning led under the power button is blinking.

Maybe a problem with a power source? There ar 2 power sources in my server. Maybe one of them is broken? How can I know that? Is there software where I can see hardware diagnostics?

My server knowledge is not quit high.

Thanks.

3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: Server rebooted

Connect to ILO and have a look into IML.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
3zzz
Occasional Contributor

Re: Server rebooted

I have set up ILO and there is the "cache module status is Failed". Probably the battery? Smart array battery broken?

Torsten.
Acclaimed Contributor

Re: Server rebooted

a failed battery should not cause a reboot, but a failed cache will probably do.

Check the status in ILO and SSA (smart storage administrator).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!