ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Set ilo2 Custom Group Via SSH

 
Torxb
Occasional Advisor

Set ilo2 Custom Group Via SSH

Using SSH into a iLO2 device, I can setup almost everything including my Directory Authenication.  However I cannot find where to set the custom groups.  I cannot see it in /map1 or /system1 anywhere.  This includes looking on a system that I manually configured via the web UI.

iLO2 Custom Group

 

Looking on a iLO3 system I see the following available

</map1>hpiLO-> show oemhp_dircfg1

/map1/oemhp_dircfg1
  Targets
    oemhp_keytab1
  Properties
    oemhp_dirauth=Directory Default Schema
    oemhp_localacct=Yes
    oemhp_dirsrvaddr=LDAP.CORP.net
    oemhp_ldapport=636
    oemhp_dirdn=
    oemhp_usercntxt1=OU=Users and Groups,DC=corp,DC=net
    oemhp_usercntxt2=OU=God Accounts,OU=Users and Groups,DC=corp,DC=net
    oemhp_group1_name=Administrators
    oemhp_group2_name=Authenticated Users
    oemhp_group3_name=CN=iLO-RW,OU=God Accounts,OU=Users and Groups,DC=corp,DC=net
    oemhp_group4_name=CN=iLO-RO,OU=Users and Groups,DC=cardinalhealth,DC=net
    oemhp_group1_priv=login,oemhp_rc,oemhp_vm,oemhp_power,config,admin
    oemhp_group2_priv=login
    oemhp_group3_priv=login,oemhp_rc,oemhp_vm,oemhp_power,config,admin

Seeing the oemhp_group1 on the ilo3 I attempted the following on iLO2:

 

</map1/oemhp_dircfg1>hpiLO-> create oemhp_group1 name=CN=iLO-RW,OU=God Accounts,OU=Users and Groups,DC=corp,DC=net
status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND ERROR-UNSPECIFIED
Invalid target.

</map1/oemhp_dircfg1>hpiLO-> set oemhp_group5 name=CN=iLO-RW,OU=God Accounts,OU=Users and Groups,DC=corp,DC=net
status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND ERROR-UNSPECIFIED
Invalid property.

 

 

It appears that the iLO3 targets are not valid on iLO2., so where does the customgroup1 get saved at on the iLO2?