ProLiant Servers (ML,DL,SL)

Setting up HP ML30 Gen 10

Occasional Contributor

Setting up HP ML30 Gen 10

Hi guys. So my employer decided we needed a file server and we purchased the ML30 Gen10 server.
Unfortunately i have never used a server before, just the normal PCs.
So i powered on for the first time and it keeps going back and forth on the bios page. It also says no network adapter is found?
How do i get past this? From my experience of normal PCs, windows can boot without network drivers installed or updated.

Re: Setting up HP ML30 Gen 10



This might be because the server is trying to boot from network. 


Please do confirm if the RAID is configured and OS is installed.


I hope the below documents help you in OS installation.


If s100i controller is installed:


Disclaimer: One or more of the links above will take you outside the HPE website. HPE is not responsible for content outside of its domain



I work for HPE

Accept or Kudo

Valued Contributor

Re: Setting up HP ML30 Gen 10

you need sure when you config the sever, it include HDD/SDD.

And you need install the win Server or Linux by yourself.