HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Shut dow during firmware update

 
mic74sl
Occasional Visitor

Shut dow during firmware update

What should I do if a server dl145 g2 shuts down during the firmware upgrade
2 REPLIES
Oleg Koroz
Honored Contributor

Re: Shut dow during firmware update

Normally with 300 series and Up you have disaster recovery for system ROM, and with 100 series there is no redundant (2nd System ROM), Refer to User Guide and side panel labels if there any switch positions for Recovery with Floppy, but I believe there is none with 145 Series G1 or G2. Just for curiosity can you check if ROM chip is Removable or soldered to System board?
Oleg Koroz
Honored Contributor

Re: Shut dow during firmware update

if it's dead replace SYS BRD