HPE Community
ProLiant Servers (ML,DL,SL)
1753774 Members
6526 Online
108799 Solutions
New Discussion

Slowly sequence write speed (HP Smart array b110i )

 
Yobaaa
Occasional Contributor

‎10-08-2015 12:31 PM - edited ‎10-08-2015 11:59 PM

‎10-08-2015 12:31 PM - edited ‎10-08-2015 11:59 PM

Slowly sequence write speed (HP Smart array b110i )

Hi Everybody. 


I had a problem - If you reinstall the operating system (w2008x64) server hp proliant ml110 g7 (HP smart array b110i 1 +0 RAID) repeatedly decreased application performance. Moreover all internal Windows processes operate without performance degradation (Windows backup task or banal copying file with Explorer). But third-party applications are less fortunate - such as database FireBirD runs 10 times slower than a normal desktop computer without RAID Array. Having tested RAID Array utility iometer, I found that the rate sequence writing does not rise above 100 IOPS (4KB block). Other parameters (sequential / random read .... - normal). I tried all that is possible - all variations FirmWare System board ROM / RAID ROM, Drivers for RAID Array, WIndows Update, swap the drives third vendors, other modes raid array (only Stripe). All this has no effect.

 *add:Stripe size =128kb

I hope to get advice.Sorry for the english (google translate).

In advance thanks.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.