Smart Array 4200 Firmware Upgrade

[Douglas Young]

Hi Folks,

I'm coming to the end of my Win2000 upgrade on a DL380G1. It's going smoothly at this point. I was told that when the system was up and stable on Win2000 I should then do the Firmware upgrade for the SA4200.

I was told though that I needed to do it in stages and could not jump to the newest release. I am presently running Rev A V1.30 and I have downloaded V1.44 B(13 Sep 02)from the download site.

Can I jump up to this version and if not, how do I get the intervening versions I need to get the SA up to date???

Also, I am running V2.53A of the System Configuration Firmware. Do I need to upgrade this at all or is it fine the way it is.

The System Board Firmware is at P17 (12/18/2002).

Any others I need to worry about???

Thanks,

Doug

[Claude Boileau]

Hi Doug

You don't need to upgrade in stages, You can go right to the latest firmware. You can also use the online version from within your win2000. cp002337.

regards