ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Array 4200 temporary disabled

SOLVED
Go to solution
Buddy_3
Occasional Contributor

Smart Array 4200 temporary disabled

Hi all,

I just bought a used Compaq Proliant 6400R with Smart Aray 4200 controller.
The problem is when I reboot it, it showed this message:

1794-slot 5 Drive Array - Array Accelerator Battery Charge low.
Array Accelerator is temporarily disabled.
Array Accelerator will be reenabled when battery reaches full charge.

FYI, I have plugged this server's power supply in to the AC source for 1 night.

Anybody know what is the problem?

Thanks in advanced.
3 REPLIES
Sunil Jerath
Honored Contributor
Solution

Re: Smart Array 4200 temporary disabled

Hello Buddy,
Sometimes it takes longer than a day so it remain powered on. If you continue to receive the same error message then you would have to replace the controller unfortunately. The spare part no is 401859-001.

Regards,
Michael Schulte zur Sur
Honored Contributor

Re: Smart Array 4200 temporary disabled

Hi,

if the battery does not load, you have two options, I think.
1. remove array accellerator
2. replace array accellerator

look here:
ftp://ftp.compaq.com/pub/supportinformation/techpubs/user_reference_guides/388777-002.pdf

greetings,

Michael
Buddy_3
Occasional Contributor

Re: Smart Array 4200 temporary disabled

Thanks guys.
The problem is solved.
I just need to let it be charged for more than 1 night (I thought it was enough).