Smart Array 641 Storage Controller

[Andrew Viney]

I have taken over responsibillity of two ML150 G3s with a smart array 641. I would like the server to email me any faults the RAID system reports but can't find the software I need to do this.

I have 3 DL320s that run software called HP Storage Manager and this does exactly what I want. This was installed using a Smartstart CD. I have run this on the ML350 but it hasn't installed that software.

Does anyone have any advise on what I do next?

Thanks

Andrew

[James ~ Happy Dude]

Hi Andrew,

>two ML150 G3s

>I have run this on the ML350 but it hasn't installed that software.

Is it 150 or 350 ???
100 series server dont respond to SS CDs.

Regards.

[Andrew Viney]

They are 2 ML350 G3s - sorry for the typo

[James ~ Happy Dude]

Do u see it under Add/remove programs ?

Other than that, DL320 is a Storage server, I am not sure if the storage manager would work on a non-storage server.

Regards.

[Igor Karasik]

You can use Insight Event Notifier - part of Proliant support pack.
You need to configure this service
(Start->Programs -> HP management agents ->Event Notifier config)

If you have many Proliant servers consider HP insight manager implementation
http://h18013.www1.hp.com/products/servers/management/hpsim/index.html