ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Array 641 Storage Controller

Andrew Viney
Occasional Visitor

Smart Array 641 Storage Controller

I have taken over responsibillity of two ML150 G3s with a smart array 641. I would like the server to email me any faults the RAID system reports but can't find the software I need to do this.

I have 3 DL320s that run software called HP Storage Manager and this does exactly what I want. This was installed using a Smartstart CD. I have run this on the ML350 but it hasn't installed that software.

Does anyone have any advise on what I do next?

Thanks

Andrew
4 REPLIES
James ~ Happy Dude
Honored Contributor

Re: Smart Array 641 Storage Controller

Hi Andrew,

>two ML150 G3s

>I have run this on the ML350 but it hasn't installed that software.

Is it 150 or 350 ???
100 series server dont respond to SS CDs.

Regards.
Andrew Viney
Occasional Visitor

Re: Smart Array 641 Storage Controller

They are 2 ML350 G3s - sorry for the typo
James ~ Happy Dude
Honored Contributor

Re: Smart Array 641 Storage Controller

Do u see it under Add/remove programs ?

Other than that, DL320 is a Storage server, I am not sure if the storage manager would work on a non-storage server.

Regards.
Igor Karasik
Honored Contributor

Re: Smart Array 641 Storage Controller

You can use Insight Event Notifier - part of Proliant support pack.
You need to configure this service
(Start->Programs -> HP management agents ->Event Notifier config)

If you have many Proliant servers consider HP insight manager implementation
http://h18013.www1.hp.com/products/servers/management/hpsim/index.html