Smart Array B110i + Windows 2008 x64

[Roduit Bertrand]

Unable to load the driver to install the basic HP ProLiant Smart Array SAS / SATA Controller Driver for Windows Server 2008 x64 Edition 6.20.0.64 March 8, 2010. The system indicates that the driver is signed pa and it is impossible to load the driver so no disk is present, secure installation.
SRV ML320G6

[Ali]

Hi Robuit,

I guess, you are referring to DL320 G6 which comes with integrated B110i smart array SATA Raid controller.

the driver that you are trying isn't the correct driver for this controller.

correct driver is:
HP ProLiant Smart Array Embedded SATA RAID Controller Driver for Windows 2003/2008 x64 Editions
File name: cp013026.exe (743 KB)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3929672&prodNameId=3929673&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-fc7b4e54c0e7433abe2f8801d5

hope this helps,

thanks
Aftab

[Roduit Bertrand]

failure is always the same

[Ali]

Hi there,

how exactly are you installing windows? locally, remotely, using virtual media... etc.

did you create driver floppy or USB ?

are you using f6 option during installation and providing the driver disk that you have created from the driver that was shared earlier..

thanks
Aftab

[Roduit Bertrand]

Local installation with a USB driver for Windows 2008 and you arrive by F6 dansune window that allows you to configure the partitions and load the driver, I find the USB drive and loads the driver, click Next, and then I get the message that indicates the unsigned driver problem, the process returns under load the driver