BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

[Smart Array Controler]E200 - POST Error 1794

Highlighted
Visitor

[Smart Array Controler]E200 - POST Error 1794

Hi all,

 

I've a HP Proliant ML310 G4 and Smart Array Controler E200. I've a POST Error 1794. So,  I've replaced the module cache with battery, 2 times ,and upgrade the firmware with the last version 1.86 but same error "battery failed".  

Then,I don't know what to do, can you help me plz?

 

PS : Sorry for my bad english.

7 REPLIES
HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

1794-Drive Array - Array Accelerator Battery Charge Low...
...Array Accelerator is temporarily disabled.
Array Accelerator will be re-enabled when battery reaches full charge.
Audible Beeps: None
Possible Cause: The battery charge is below 75 percent. Posted writes are disabled.
Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours.

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

Thanks for your reply

 

the array accelerator and the cache module are the same, right?

If this is the case, i replaced the array accelerator/cache module with battery 2 times because the first time, i 'd still the same error and i thought the module or the battery cover were defective. So, i still have the same error after the second replacement.

 

Thx

HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

Please send me an ADU report

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

Thx for your reply

 

How to generate ADU report? it need a reboot, no?

HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

-All programs ==> HP System Tools ==> HP Array Configuration Utility  

 

 

 

Diagnostics ==> Generate Diagnostic Report

 

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

Visitor

Re: [Smart Array Controler]E200 - POST Error 1794

Hi,

 

here is the report

it is on HP Array Diagnostic Utility

 

Thx

HPE Pro

Re: [Smart Array Controler]E200 - POST Error 1794

First of All your server is out of date

Please update it using SPP :

http://h17007.www1.hp.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx

 

after that send me new ADU :)

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details