ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Smart Array P400 question

Occasional Advisor

Smart Array P400 question



I have ProLiant DL320s G1 server with Smart Array P400 controller.

I have one logical disk with only one physical disk confiruged as RAID 0.


There is configuration from hpacucli:

Array: A
Interface Type: SATA
Unused Space: 0 MB
Status: OK


Logical Drive: 1
Size: 149.0 GB
Fault Tolerance: RAID 0
Heads: 255
Sectors Per Track: 32
Cylinders: 38298
Strip Size: 128 KB
Status: OK
Array Accelerator: Temporarily Disabled
Unique Identifier: 600508B10010443953554A31474E000A
Disk Name: /dev/cciss/c0d0
Mount Points: none 3.7 GB, / 5.6 GB, /usr 139.7 GB
Logical Drive Label: A020CB5DP61630D9SUJ1GNCB88

physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 160 GB
Firmware Revision: 3.AJJ
Serial Number: XXXXXXXX
Model: ATA ST3160812AS
SATA NCQ Capable: False
PHY Count: 1
PHY Transfer Rate: 1.5GBPS


Can I add another one same size disk to this logical drive and convert it to RAID1?

Occasional Advisor

Re: Smart Array P400 question

of course without data lost