Smart Array P410i: Changing faild disk in RADI 5

[sv7874]

I have Smart Array P410i with two arrays.

Array A had 4 disks. One disk had failed (1I:1:3)
I believe I made a mistake, when I inseted new disk in 2I:1:8.

Now I know, I should have removed disk from bay 3 and inserted new disk in same bay.
Array A is now in Waiting for Transformation state.

Is it now safe to remove disk from bay 3 and to insert the new one (I have one more)?

best regards, Sebastijan
-----------------------------------------------------------

# hpacucli ctrl all show config

Smart Array P410i in Slot 0 (Embedded) (sn: 5001438020E79EC0)

array A (SAS, Unused Space: 0 MB)

logicaldrive 1 (838.1 GB, RAID 5, Waiting for Transformation)

physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, Failed)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)
physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 300 GB, OK)

array B (SAS, Unused Space: 0 MB)

logicaldrive 2 (558.7 GB, RAID 5, OK)

physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 300 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 300 GB, OK)
physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 300 GB, OK)

SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 (WWID: 5001438020E79ECF)