Smart Array P410i Embedded Firmware Upgrade Needed

Mehmet Akalin · ‎09-09-2015

Hello,

I am looking for Smart Array P410i Embedded Firmware Upgrade for ProLiant ML350 G6, but I cannot find anything on HP Community, Blog and Support pages. My server's P410i Embedded Adapter's firmware is v2.0 Actually I would like to expand logical volume size on RAID 1 configuration and I could not any document about it. Could somebody help me about this situation ?

Thanks for all replies,

Mehmet

Torsten. · ‎09-09-2015

Go to hp.com -> drivers ... etc and you find

version 6.64 for windows for example

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3902577&lang=en&lang=en&cc=us&cc=us

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Mehmet Akalin · ‎09-09-2015

Thanks Torsten. It was very helpful.

I need more help about expanding logical volume on the server. I have Windows Small Business Server 2008 running on HP ProLiant ML350 G6 server. It has p410i embedded storage adapter and it has RAID 1 configured two 72 GB hard drives. I already ordered 2 pieces 300 GB hard drives for replacement and expanding. I could not find any documentation about expanding RAID volume without losing data especially Windows OS system data. How can I find a document about this situation ?

Thanks again,

Torsten. · ‎09-09-2015

Ensure the RAID is healthy, pull a disk and insert a new disk. Wait for the rebuild. Pull the other disk and replace. Once the rebuild has finished, expand the array. Finally adjust the file system from OS.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Mehmet Akalin · ‎09-09-2015

Thanks Torsten. RAID is healty right now. After replacing and rebuilding second disk, how can I expand the array ? Is there an utility on ACU or I should do it on BIOS RAID Utility ?

Thanks,

Torsten. · ‎09-09-2015

It is an option in ACU (SSA) only shown if the operation is possible.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Mehmet Akalin · ‎09-09-2015

Thanks.

Do you know how it is called ? "Expanding, Migrating, etc. ?"

Thanks,

Torsten. · ‎09-09-2015

You will find it ... it is called expanding.

Better google

"HP Smart Storage Administrator User Guide"

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Mehmet Akalin · ‎09-09-2015

Thanks for all replies Torsten.

djdacore · ‎12-13-2017

Hi I was trying the link that you sent, but it has no result. Can you give me a good link? I'm searching already the whole day but cant find the right one.
Its for my ML350G6 P410i array firmware update.

BOYAN BIANDOV · ‎02-13-2018

The latest is 6.64 and you can download it by doing few searches at HPE's drivers and software page: