HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Array P410i in ML350G6 wouldnt extand

 
k_romych
Established Member

Smart Array P410i in ML350G6 wouldnt extand

Hi,

I have an HP ML35 350 G6 with Smart Array P410i.

It had 4 active drives and 1 spare 279Gb each making 838 G logical drive. I have added another drive and added it to the raid so there are 5 x 279 Gb drives in the raid. It has synced but logical drive still showing only 838 Gb size when it should be 1116Gb.

Any ideas?

Thanks

 

2 REPLIES
RbBsmn
Regular Advisor

Re: Smart Array P410i in ML350G6 wouldnt extand

Just thinking out loud, not sure if its actually correct:
If you let the acu decide what is the best solution for your setup, it might have changed it from a RAID 5 + spare to a RAID 6 + spare.
Might want to check if the selected RAIDA level is correct.
Did my post help? Thank me with kudo's! :)
k_romych
Established Member

Re: Smart Array P410i in ML350G6 wouldnt extand

Thanks for the thought but fault tolerance is still Distributed Data Guarding (RAID 5), not raid 6