Smart HBA H240 disable drive

[greyii]

My Smart HBA H240 disable drive and write:

The drive contains Smart Array or Smart HBA configuration data and has been disabled in order to protect the configuration data. Please run "clear configuration data command" on the drive to re-enable it

Please tell me, how i can run this command for enable drive?

I don't see F2 when boot server.

Thanks.

[StorageMike]

Hi

Take a look at https://support.hpe.com/hpesc/public/docDisplay?docId=c03909334 page 10 onwards, you'll need to look in the HPE Smart Storage Administrator to clear the error

it's F5 or F10 depending on your server model

[greyii · Accepted solution]

Thanks, but link did't work - (Error: [500: Internal Server Error])
I solved - change mode of H240 from HBA to RAID and all worked.

But i don't remember how mode was set in first time...

[SanjeevGoyal]

Hello, Please let me know if you have any other queries. If you feel this was helpful please click the KUDOS! thumb below! Regards,