SmartArray Configuration on ESXi

[restv6417]

Is it possible to set up an online RAID setup for the DL380 Gen10?
It is running in the following configuration

Server Model:DL380 Gen10
RAID Model:SmartArray P816i-a
OS:VMware ESXi 7.0

Dell has iDRAC and OpenManage to set it up, but
It would be nice to be able to set it up in iLO and OneView.

[Torsten.]

You can setup the RAID using Intelligent provisioning (either press F10 during boot or use the link within ILO) or use OneView.

[restv6417]

Thanks for your reply!
But,I want to be configure raid without shutdown.

[SanjeevGoyal]

Hello,

Thank you for contact community support.

Yes, you can configure the raid group from SSA CLI, follow the below documents.

HPE Smart Storage Administrator (HPE SSA) CLI for VMware vSphere 6.5

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_5fa5b0d965c84875b9b7410471#tab-history

HPE Smart Array SR Gen10 configuration Guide (Page no 59)

http://itdoc.hitachi.co.jp/manuals/ha8000v/hard/Gen10/SA/882375-002_en.pdf

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[restv6417]

Hello 

thank you for your reply.

I think "HPE SSA CLI" is command line only,

Is there any other way like graphical user interface ?

[SanjeevGoyal · Accepted solution]

Hello,

Intelligent Provision is only the way to configure the raid but for that server needs to shut down.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,