HPE Community
ProLiant Servers (ML,DL,SL)
1753701 Members
5051 Online
108799 Solutions
New Discussion

SmartStart Scripting Tools 1.7 with Conrep 1.72 32 bits

 
Clot Angelo
Occasional Contributor

‎06-11-2007 01:02 AM

‎06-11-2007 01:02 AM

SmartStart Scripting Tools 1.7 with Conrep 1.72 32 bits

Hello Guy's !

I must deactivate HyperThreading on all my servers (800). On all Windows 2003 32 bits I run conrep tools with XML and DAT configured File in an batch file. The command is conrep.exe -l -fconrep.ini. After the reboot, the Hyperthreading is Deactivated.

I repeat this operation with conrep 64bits. The tools does not make error on the screen but, after the reboot the Hyperthreading is always activated.

In EventViewer System I have a error EventID 7000 Source Service Control Manager : The HP SmartStart Scripting ToolKit I/O Driver service failed to start due to the following error : The system cannot find the file specified.

Who as an idea ?
0 Kudos
Reply
1 REPLY 1
Bryan_Lucas
Occasional Advisor

‎07-10-2007 08:15 AM

‎07-10-2007 08:15 AM

Re: SmartStart Scripting Tools 1.7 with Conrep 1.72 32 bits

same here...
conrep.exe v 1.72 and conrep.xml dated 3.19.2007
conrep -s -fDL380G5.xml -xconrep.xml returns:
This entry (Diskette_Boot) needs the Toolkit I/O driver to be loaeded to be supported.
Same for (Numlock) (POST_Speed_Up) and 8 others.
I am in 64-bit WinPE 2.0 environment with Windows 2008 PSP installed.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.