HPE Community
ProLiant Servers (ML,DL,SL)
1753519 Members
5406 Online
108795 Solutions
New Discussion юеВ

Re: SmartStart6.2 and 641 Controller

 
JohnWRuffo
Honored Contributor

тАО04-15-2003 05:57 AM

тАО04-15-2003 05:57 AM

SmartStart6.2 and 641 Controller

I have a ML370G3 using SS6.20 and the system does not seem to recognise the SA641 Controller installed.
RBSU is set to boot to this and the Array has been built in the card config but I am guessing SS6.20 does not know about the new controller... Smart Start shows it as Unknown Device 0046.

Is there a way to add support for the controller?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
4 REPLIES 4
Terry Hutchings
Honored Contributor

тАО04-15-2003 06:00 AM

тАО04-15-2003 06:00 AM

Re: SmartStart6.2 and 641 Controller

Yes, the support has been added to Smart Start 6.3
The truth is out there, but I forgot the URL..
0 Kudos
Reply
JohnWRuffo
Honored Contributor

тАО04-15-2003 08:08 AM

тАО04-15-2003 08:08 AM

Re: SmartStart6.2 and 641 Controller

Yanked it after searching hi and low for a way to make it work... Installed a 532 to build it... I'll upgrade later.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
Terry Hutchings
Honored Contributor

тАО04-15-2003 09:01 AM

тАО04-15-2003 09:01 AM

Re: SmartStart6.2 and 641 Controller

There is no way to get an "assisted" install to work with the 641/642 controller and the 6.2 Smart Start CD.

This will require a manual install.
The truth is out there, but I forgot the URL..
0 Kudos
Reply
saigo999
New Member

тАО05-19-2005 04:54 AM

тАО05-19-2005 04:54 AM

Re: SmartStart6.2 and 641 Controller

sorry to highjack a thread, bu I am a newbie that got his hands on a compaq proliant 4500...and would like to know what can be done to upgrade it...this will be for a home environement and testing for clusters ...later date.

anyways here is the link for this...
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=884028

hopefully you can help me?

If not thanks anyways.
have a great day all..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.