ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SmartStart6.2 and 641 Controller

JohnWRuffo
Honored Contributor

SmartStart6.2 and 641 Controller

I have a ML370G3 using SS6.20 and the system does not seem to recognise the SA641 Controller installed.
RBSU is set to boot to this and the Array has been built in the card config but I am guessing SS6.20 does not know about the new controller... Smart Start shows it as Unknown Device 0046.

Is there a way to add support for the controller?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
4 REPLIES
Terry Hutchings
Honored Contributor

Re: SmartStart6.2 and 641 Controller

Yes, the support has been added to Smart Start 6.3
The truth is out there, but I forgot the URL..
JohnWRuffo
Honored Contributor

Re: SmartStart6.2 and 641 Controller

Yanked it after searching hi and low for a way to make it work... Installed a 532 to build it... I'll upgrade later.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Terry Hutchings
Honored Contributor

Re: SmartStart6.2 and 641 Controller

There is no way to get an "assisted" install to work with the 641/642 controller and the 6.2 Smart Start CD.

This will require a manual install.
The truth is out there, but I forgot the URL..
saigo999
Occasional Visitor

Re: SmartStart6.2 and 641 Controller

sorry to highjack a thread, bu I am a newbie that got his hands on a compaq proliant 4500...and would like to know what can be done to upgrade it...this will be for a home environement and testing for clusters ...later date.

anyways here is the link for this...
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=884028

hopefully you can help me?

If not thanks anyways.
have a great day all..