HPE Community
ProLiant Servers (ML,DL,SL)
1753783 Members
7072 Online
108799 Solutions
New Discussion юеВ

Re: Smartstart 6.0

 
Finn Lehmkuhl
New Member

тАО11-14-2002 12:45 AM

тАО11-14-2002 12:45 AM

Smartstart 6.0

Using the new Smartstart 6.0 I expirience several problems.
On proliant 1600 and 2500 it hangs during startup. Applying the SSD I get the new webbased ACU - great I thought at first, but it is not an easy to use tool and you miss the status indicator very much. Furtunatly the old ACU can still be activated, showing you the progress of the Array expansion. At the end I would just like to remind everyone to upgrade firmware on BIOS, SMART controller and DISKS.
0 Kudos
2 REPLIES 2
Mark Cloutier
Respected Contributor

тАО11-18-2002 09:02 AM

тАО11-18-2002 09:02 AM

Re: Smartstart 6.0

Dear Finn,
FYI
For the older Servers, (1600, 2500, 5000, etc.) you cannot use smart Start 6.0 to boot off of. This is due the SS 6.0 will only work with the RBSU of the newer servers. Any previous version of Smart Start will work fine with these older Servers.

Mark
We are here for a good time, not a long time!
0 Kudos
Finn Lehmkuhl
New Member

тАО04-07-2005 11:29 PM

тАО04-07-2005 11:29 PM

Re: Smartstart 6.0

Marks reply was usefull
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.