ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Smartstart Scripting Toolkit w/DL380G3

 
Ed Cox
Respected Contributor

Smartstart Scripting Toolkit w/DL380G3

Got a quick question.
In the SSSTK you create a bootable floppy with SP11731 (MultiNIC boot utility). This puts an autoexec, config.sys, etc. on the floppy along with a \Net directory. Underneath the Net directory is a file called Protoini.tmp where on the last line of the file under the DOS device driver section you specify the slot number for the first nic on the server.
(i.e. for a DL 380G2 it is: slot=0x002
DL 360G1 is 0x0064)
Does anyone know what the slot number is now for a DL 380 G3? Typically in the past if you put in an invalid slot number in the .tmp file it would tell you that it was invalid and would present you with the possible slot parameters. Apparently the customer is not seeing that message. Any help would be greatly appreciated.
Thanks,
Ed