ProLiant Servers (ML,DL,SL)
1748227 Members
4230 Online
108759 Solutions
New Discussion

Re: Smartstart Test vs Diagnostics

 
raan2222
New Member

Smartstart Test vs Diagnostics

Hi everybody!

Does anybody have knowledge about different between Test and Diagnostics in HP smartstart disk?

I have DL360G7 with array controller P410i with two HDD sff 300GB RAID1.

There are no any error during and after test storage but I have error code F155 on diagnostics.

Why so?

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Smartstart Test vs Diagnostics

I would do the same test using the diagnostics from SPP 2016.04 first.

Smartstart is meanwhile a bit outdated ...

 

In case of doubt open a call at HPE and send them an ADU report.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!