ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Smartstart Test vs Diagnostics

Occasional Visitor

Smartstart Test vs Diagnostics

Hi everybody!

Does anybody have knowledge about different between Test and Diagnostics in HP smartstart disk?

I have DL360G7 with array controller P410i with two HDD sff 300GB RAID1.

There are no any error during and after test storage but I have error code F155 on diagnostics.

Why so?

Acclaimed Contributor

Re: Smartstart Test vs Diagnostics

I would do the same test using the diagnostics from SPP 2016.04 first.

Smartstart is meanwhile a bit outdated ...


In case of doubt open a call at HPE and send them an ADU report.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!