HPE Community
ProLiant Servers (ML,DL,SL)
1753361 Members
5588 Online
108792 Solutions
New Discussion

Smartstart not finding array

 
Terry Hancock
Occasional Contributor

‎03-14-2006 09:52 PM

‎03-14-2006 09:52 PM

Smartstart not finding array

We are loading Smartstart 7.4 onto our brand new ML350 G4 tower and it is not finding the onboard array controller. - No array controllers detected. Although when booting the bios see's all the drives and the array.

Any assistance would be great.

Array: 64-bit 133mhz - non intelligent - dual channel ultra 320 host bus adapter
If no-one saw you break it, deny all knowledge!
0 Kudos
Reply
1 REPLY 1
Igor Karasik
Honored Contributor

‎03-14-2006 10:23 PM

‎03-14-2006 10:23 PM

Re: Smartstart not finding array

>>>and it is not finding the onboard array controller.
SmartStart looking for SmartArray controller and ML servers don't have onboard SmartArray controller.
Furthermore, ML350 G4 in basic configuration doesn't have any SmartArray controller (Smart Array 641 Controller included only in ML350 G4 Array Models)
>>dual channel ultra 320 host bus adapter
it is SCSI controller without hardware RAID possibility.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.