ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Solaris 9 on ProLiant ML370 G4

 
CA1217234
Occasional Visitor

Solaris 9 on ProLiant ML370 G4

Hello,

we're trying to install Solaris 9 on a new ProLiant ML370 G4 server, which is equipped with a SmartArray 6402 controller.

We created one RAID ADG volume consisting of all six 146GB drives and used the driver from the ML370 support website at www.hp.com to access the volume from Solaris.
However during installation, Solaris complains about not finding any disks. Still it recognizes some kind of drive with about 46GB capacity.

We noted that HP does not explicitly list the SmartArray 6402 controller as being supported by the driver cpqary3. Does this mean that our model is currently unsupported?

Does anyone have any suggestions on how to get Solaris 9 to work on this server? I will supply more detailed error information once I'm at the machine again.

Thank you,
Peter Buecker
1 REPLY
CA1237121
Occasional Visitor

Re: Solaris 9 on ProLiant ML370 G4

Greetings,

Set MPS Table Mode to Full Table APIC

Use RAID 5

enable max boot in array controller

thx
ken